| THE SEATTLE OLD BIKE SWAP MEET IS COMING NEXT MONTH!|
HERE IS THE LINK TO THEIR SITE
| Does anyone know about spryte engine! Where can you find them? It was used in the 1950's as a motor bike engine. If anyone has any information on this it would be helpful.|
I just hooked up my kit and i cant figgure out how to disengage/engage the clutch.. it is "stuck" engaged (so i cant freely pedal or start the bike) im sure everything is installed right.. is there an adjustment/ something i need to do still.. when i move the clutch arm nothing seems to happen. please let me know.. thanks
| Does you clutch hook up if you disconnect the cable/linkage? You know, all of those things need adjustment that isn't too tough one you remove the right side cover.|
| O.K. Its either disengaged (pedal) or engaged (motor) there isn't an option c. I think your problem is with the clutch cable slack, take it up.|
| I ended up taking the clutch arm off and replacing it at a more workakable angle to the pull point of the cable since the clutch lever was difficult to opperate. (at the 2 o'clock position instead of the 3-4 o'clock.)|
| just installed a 'kings' 80cc engine purchased from 'onecylinder' in missouri(great customer support!); runs perfect. the clutch lever should have a lock on it to disengage the clutch when pedaling. i've seen a bike built in so. california that used a rubber strap to hold in the clutch when riding as a bike. replaced the clutch cable(cheap, cheesy, chinese) with a 'vespa' cable-- much stronger, less pliable than the 'string' provided with the kit. you'll figure it out and when you do, you'll have a blast on that thing. good luck...|
| Get your TAS, Free Spirit, Bug, etc. 2 cycle bike motor ready for spring. Replace your points and condenser with an electronic ignition system. Quick and easy installation on the inside of the front cover so nothing shows. Kit includes the system, picture instructions and a new spark plug. I think my motors start easier and run better with them installed.|
$35.00 including S&H 48 states.
| recently acquired a 'chicken power' engine with bicycle... looks brand new-- does anyone have experience with one? thanks!|
| Hi Willie -|
I have two engines, One of them I have mounted on a bike. If I can help you in any way, Just E-mail me.
| Willie -|
If you want to see my bike, go to,
email@example.com --Click on whats new, and then on the picture.