| 2 1979 Motobecane motorbikes only 700miles on each,one perfect,one needs minor repairs.One 1988 Suzuki FA 50 motorbike only 50 miles ,50 miles,mint condition.Moving,must sell,pick up only or delivery short distance.South Chicago Suburb.Very reasonable package deal,call Ken Watts 708 534 8601|
| I have a vintage circa 1950 Buzzboy motorbike kit which has a Power Products Model 1000 motor. I had this as a preteen in 1950's and recently put it on a 26 inch new cruser type bike and it is up and running. I would like to communicate with anyone else who has one (or knows of one) and trade information, pictures etc. I can not find any information on this motorbike kit or its company. |
| Don't recognize the Buzzboy name but The old Travis bike motor was made by power products and may be a close cousin. Look up Travis in the forums.|
| I now have an eletric powered byke , in the 1950s I owned a Power Pak motorised bicycle , I went miles and miles on that , started on a Sunbeam bycicle ( sacriledge ) , then bought a sprung frame for it , would love one again now , does anybody know the make of the green autocycle in the VISA advert on the television ?.|
| Good morning all. I want to try my hand at taking an older cruiser bicycle and mounting a 2-3 hp vert shaft gas motor on it. I have seen several pictures of these on the net. The rear drive pulley seems to be attached to the spokes. If someone could shed some light on what is used to attach the pulley to the spokes, I would be grateful. Thanks Keith|
| Most of the old motorbikes like Whizzer and Monark used the same type of sheave,or pulley,mounted on the spokes. the short bolts go through the sheave holes and a nut and special washer go on the back side. You can buy the mounting kits on e-bay, and sometimes the sheaves. New ones are available at Memory Lane.|
| keith, after reading your post, I noticed that you wanted to mount a 'vertical' shaft motor on your bike, a lot of the "experts" will tell you that it can't be done, to expensive, ect ect but i beg to differ, if you will log on to my myspace website at url/retired tinkerer you will find 2 bikes [pictures and videos] that i built for my son and one of his friends. both are powered by 3 1/2 horse b&s lawnmower motors and run about 25mph|
| want to mount b&s vertical mower engine on a bike|
I AM INTERESTED IN PURCHASING 1---80CC GAS MOTOR BICYCLE KIT. I AM STARTING A BUSINESS AND WOULD LIKE TO SHOW CASE THIS PRODUCT FROM YOUR COMPANY. THEIR IS QUITE A BIT OF INTEREST IN THIS PRODUCT, BUT IT WOULD BE A GREAT ADVANTAGE TO ACTUALLY HAVE ONE IN STOCK. SO I AM INTERESTED TO KNOW IF YOU SHIP TO POLAND BY MAIL (GROUND SERVICE) AND WHAT WOULD BE THE PRICE OF SHIPMENT AND ALSO WHAT IS THE PRICE OF YOUR 80CC GAS MOTOR BICYCLE KIT. PLEASE RESPOND TO MY QUESTIONS. WHAT WOULD BE THE TOTAL PRICE OF 1- KIT AND THE SHIPPING (TOTAL PRICE).
I AM SURE THAT IN THE NEAR FUTURE YOU WOULD BE GETTING A MUCH LARGE QUANTITY ORDER FROM ME.
AS I STATED THIS IS JUST A START.
PAYMENT FOR THIS ORDER WOULD BE BY WESTERN UNION ----FUTURE ORDERS WOULD BE SET UP THROUGH MY BANK, BUT RIGHT NOW THAT IS IN THE PROCESS OF BEING SET UP.
THANK YOU FOR YOUR TIME. AND I HOPE YOU CAN SEND ME THIS KIT AS I REQUESTED.
MARIUSZ AND BOGUSIA KSIAZYNSKI
| Does anyone know where I can find information on the Bowen Motorized bicycles? I have one from around the 1930's and am trying to determine it's value. All we know so far is that the company mainly produced bicycles and produced a few motorized versions, but not a lot of them. If anyone has any information can they please email me on firstname.lastname@example.org. Thanks, David.|